Monteringsanvisning

Vi rekommenderar att innan ni påbörjar monteringen av ert nya Snêk kök läser igenom denna guide och tittar på våra steg- för-steg monteringsanvisning filmer. 

Kitchen planning

2026-02-26 No Comments

Plan your kitchen with us

Get started with your kitchen — together with a kitchen planner. Book a meeting and try our design tool. Receive guidance in shaping a solid wood kitchen tailored to your home.

Explore your kitchen in our design tool

With our design tool, you can begin exploring what your kitchen could look like. Try different layouts, materials and expressions to get a better sense of how the kitchen can be tailored to your space. The tool can be used on your own or together with personal guidance from a kitchen planner, at your own pace and without any pressure to buy.

The design tool is optimized for desktop and does not work on mobile.

Please note: We recommend that you do not use our design tool in the Safari browser.

Due to limitations in Safari, we cannot guarantee that all features, such as saving your kitchen design, will function correctly. For the best experience and full functionality, please use a different browser.

Why plan your kitchen together with Snêk?

At Snêk, you plan your kitchen together with the people who also manufacture the kitchens. This ensures that every solution is grounded in materials, construction and real conditions — not in standard systems. You receive a plan that holds all the way through, no matter how far you choose to take the process.

What happens during the meeting?

The meeting is designed to give you clarity and direction in your kitchen planning. Together, we go through your needs and preferences, review the layout based on the room’s conditions, and discuss materials, function and overall expression. You will also receive an overview of the possibilities and the complete picture.

After the meeting, you decide if and how you would like to move forward. No obligation.

Here’s how it works

We begin with a personal meeting and create a design tailored to your home. During the final review, you have the opportunity to adjust the design before production begins. The kitchen is then manufactured in solid wood. Depending on what suits you, it can be delivered painted or untreated, assembled or unassembled. Regardless of the setup, the kitchen is customized to your space and delivered with the same care and quality in every detail.

Let’s create a kitchen built for your home.

We offer both digital meetings and in-person meetings in Stockholm, but you’re also very welcome to get in touch without booking anything at all.

Kitchen Inspiration from our customers

Every home is different. So are our kitchens.
Here, we share images from customers who have built their kitchens with Snêk — in their own way.

Premium kitchen

2026-02-25 No Comments

Premium kitchens in solid wood –
a complete solution without compromise

With Snêk, you get a built-in kitchen in solid pine, created for your home and finished down to the smallest detail. We design, manufacture, paint and install your kitchen. A personal piece of craftsmanship made to last, tailored to the room, your life and your taste.

Why choose Snêk?

We build kitchens for those seeking something beyond a standard solution. Every kitchen is made to order in solid pine — a living material that ages beautifully and is built to last for generations. By working with the entire solution, we ensure quality, expression and function from the first idea to the finished kitchen.

• Solid wood throughout, with no veneer or shortcuts
• Custom-built to suit the room’s dimensions, angles and conditions
• Swedish craftsmanship with a focus on longevity and quality
• One dedicated contact throughout the entire process

A complete solution

With Snêk, you receive a finished kitchen without having to coordinate multiple suppliers. We take responsibility for the whole and build your kitchen in solid wood with carefully considered material choices and processes that make a difference. All our kitchens are manufactured in our facility in Törefors according to your measurements and design choices, and we actively work with sustainability throughout the entire production process.

In collaboration with Plockhugget, we deliver our kitchens using certified continuous-cover forestry timber — a way to support more nature-friendly forestry and take responsibility for the forests of the future.

• Personal kitchen design
• Made-to-measure production
• Professional painting
• Fully assembled cabinet frames

Here’s how it works

We begin with a personal meeting and create a design tailored to your home. During the final review, you have the opportunity to adjust the design before production begins. The kitchen is then manufactured, painted in your chosen color and delivered assembled, ready for installation in your home.

Let’s create a kitchen built for your home.

We offer both digital meetings and in-person meetings in Stockholm, but you’re also very welcome to get in touch without booking anything at all.

Kitchen Inspiration from our customers

Every home is different. So are our kitchens.
Here, we share images from customers who have built their kitchens with Snêk — in their own way.

Butcher block and work table

2026-02-25 No Comments

Assambly of butcher block and work table

Menu
Menu

The cabinet for the butcher’s block and work table is assembled according to the same principle as “CABINETS”.

• Assemble the side panels to the bottom panel using 4 wood screws, 4.0 × 35 mm.

• Attach two (or four, if space allows) plinth legs using 4.0 × 40 mm wood screws.

Note: Avoid screwing near the routed recess.

For inset plinths with a lip, the plinth legs must be positioned 90 mm from the front edge (measured without the front attached).

• Install the back panel, ensuring that it is pressed fully down into the groove in the bottom panel.

• For cabinets with a butcher’s block: slide the shelf into the pre-routed groove in the cabinet. Secure the shelf from the outside of the cabinet using 4.0 × 35 mm wood screws (4 screws per shelf). Slide the “loose” bottom panel into the pre-routed grooves above the bottom panel.

• Install the top rails at the back and front edges. Use 4.0 × 35 mm wood screws (4 screws per rail).

• Fasten the frame clips using 3.5 × 15 mm pan head screws (1 screw per frame clip).

Note: New drill template – read “DRILL TEMPLATE” before installation.

• Install the wall rail onto the wall. Use wood screws of a suitable length depending on the wall material (screws not included).

• Attach the mounting rail to the back of the cabinet using 4.5 × 25 mm wood screws (2 pcs).

• Attach the front to the cabinet.

• Place the butcher’s block or work table into the cabinet.

Meeting with Fredrik

2026-02-25 No Comments

Book your meeting with Fredrik.

Here you can easily book a meeting with Fredrik. Choose a time that suits you, and we’ll take it from there.

Kitchens for homes close to nature

2026-02-25 No Comments

Build your Snêk kitchen yourself – in solid wood

Solid pine kitchen cabinet frames – ready for you to assemble and paint yourself. For those who want to lower the cost without compromising on quality, materials or the possibility of customization.

For those who want to add their own personal touch

This option is ideal for those who want to assemble and paint the kitchen themselves, while still having a solid wood kitchen tailored to their home. You receive the same core quality and level of customization as in our complete solutions, and take responsibility for the final step yourself.

A kitchen built to be assembled by you

We deliver made-to-measure cabinet frames. The kitchen is prepared for assembly, and you are responsible for installation and painting yourself, with support from us whenever needed.

The choice of materials is a central part of how we build our kitchens. The cabinet frames are made from solid pine — a durable and living material selected for its strength, long lifespan and ability to be maintained over time. Our approach is based on longevity and care, ensuring that the kitchen can be used, adapted and continue to evolve for many years to come.

Here’s how it works

We begin with a personal meeting where we go through your needs, preferences and the conditions of the space. Based on this, we create a design tailored to your home. During the final review, you have the opportunity to adjust the design before production begins. The kitchen is then manufactured in solid pine. The cabinet frames are packed and delivered to you unfinished, prepared for assembly. The final installation and painting are carried out by you, at your own pace and in the color of your choice.

Let’s create a kitchen built for your home.

We offer both digital meetings and in-person meetings in Stockholm, but you are also very welcome to get in touch without booking anything at all.

Kitchen Inspiration from our customers

Every home is different. So are our kitchens.
Here, we share images from customers who have built their kitchens with Snêk — their way.

Perforated metal sheet

2026-02-25 No Comments

Installation of perforated metal sheet

Menu
Menu

If you have purchased your kitchen pre-painted, the perforated metal sheet is already treated and mounted on the cover panel or frame. If you have chosen an untreated kitchen, the sheet will be delivered unpainted and unmounted. To ensure durability, the perforated metal sheet should be painted before installation.

Surface treatment of perforated metal sheet

1. Preparation

• Cleaning: Wipe the perforated metal sheet with alcohol (e.g., isopropanol) or thinner to remove grease and dirt.

• Sanding: Use fine sandpaper (240–320 grit) to roughen the surface and improve paint adhesion. Wipe away dust with a clean cloth.

2. Priming

• Apply a metal primer to enhance adhesion and protect against rust. Allow the primer to dry according to the manufacturer’s instructions before proceeding with painting.

3. Painting

• Brush & Roller: For a traditional painted finish, use a fine brush or foam roller. Apply the paint in thin layers with long, even strokes to avoid streaks.

• Spray Paint: For a smooth and even finish, use spray paint. Hold the can about 20–30 cm from the surface and apply several thin layers. Let each layer dry before applying the next.

• Drying: Follow the paint manufacturer’s recommendations for drying time.

4. Finishing (Optional)

• For extra protection, a clear coat can be applied after the paint has dried. This enhances durability and protects against scratches.

Installation

• The perforated metal sheet is mounted into the pre-milled groove in the cover panel or frame.

• Use an appropriate adhesive, such as hot melt glue, PU glue (Extern Fix), epoxy glue, or another adhesive suitable for metal and wood.

• Press the sheet carefully into the groove and allow the adhesive to cure according to the manufacturer’s instructions.