To install the blind front panel, use the supplied fittings, 2 fittings per front panel. It is recommended to install the front panel before the countertop is placed, to make the installation easier.
• Start by mounting the fitting’s peg into the cabinet frame using 3.5×17 mm wood screws. Pre-drilled holes for the peg are already in place in the frame.
• Once the peg is mounted in the cabinet frame, attach the bracket onto the peg
• Position the front panel where it should be installed and mark with a pencil where the holes for the bracket should be.
• Pre-drill the holes (make sure not to drill through the front) and fasten the bracket to the front panel using 3.5×17 mm screws.
• Push the front panel into place on the cabinet frame.
