For the cabinet of the fridge and freezer, a screw list of 38×20 mm is included. Mount the list on the hinge side, both at the front and rear edges (pre-drilled holes are provided). Use screws 4.0×35 mm (3 screws per list).
When using the door-on-door system, it is important to ensure the correct placement of the fridge and freezer within the frame. Position the appliance so that it is close to the side where the handle is located, not on the hinge side. Then, attach the door to the appliance according to the appliance supplier’s instructions to ensure a stable and functional installation.
The tall cabinet for a combined fridge/freezer is supplied with a loose shelf on which the appliance is placed, as well as panels that function as shelf supports.
The panels are cut on site to the correct height based on the appliance dimensions, ensuring that the appliance aligns correctly with the cabinet fronts.
Cut the panels to size and mount them vertically against the cabinet sides. Secure them using 3.5 × 35 mm screws. The panels must be installed so that they provide full load-bearing support for the weight of the appliance.
Then place the shelf on top of the mounted panels and secure it from above using 3.5 × 35 mm screws.
Ensure that the shelf is level before positioning the appliance.
The frame piece with biscuit slots is mounted to the underside of the upper door. Installation is carried out by applying glue in the biscuit slots, inserting the biscuits, and joining the door and frame piece together.
Cabinets for oven and hob have no back or wall rail and do not need to be fixed to the wall. These cabinets are connected with connection bolts.
If the oven door collides with the frame when opened, the oven must be raised a few millimetres by placing shims underneath it until sufficient clearance is achieved
