Only one hole is pre-drilled in the cabinet for the system screw. The other two holes are drilled during the installation of the drawer due to potential humidity-inducted variations in the cabinet depth (up to 2 mm). Use a 4,5 mm drill bit for these holes. is used. A horizontal line has been milled into the cabinet to help ensure the drawer is horizontally aligned
For drawers inside doors, mount the runner using the first hole from the edge of the cabinet. For drawers with drawer fronts, use the second hole from the edge for mounting.
For drawers inside doors, mount the runners on distance strips to ensure proper clearance. Place the distance strip on the hinge of the cabinet. If the cabinet has two doors, install distance strips on both slides.
• Position the spacer strip so that its top edge aligns with the marked groove on the side of the cabinet frame.
• The front edge of the spacer strip should align with the beginning of the groove.
• Fasten the spacer strip through the pre-drilled holes from inside the cabinet using 3 pcs 4.0 × 55 mm screws per spacer strip.
• Mount the drawer runner onto the spacer strip. The top and front edges of the drawer runner should align with the top and front edges of the spacer strip.
It is recommended to attach the drawer runners to the cabinet before mounting the cabinets.
