• Assemble the plinth pieces, connect the pieces using 2+2 wooden screws 3.5×50.
• Screw in the framework-click with a 3.5×15 screw with a lumpy head (one screw/ framework-click).
• Place the plinths in their designated position.
• secure the frame to the cabinets.
• Fasten the fittings for clips for plinth legs with 3×12 (2 screws/fittings).
• Click the plinth into the plinth legs.
• Fasten the frame to the cabinets.
• Fasten the frame to the cabinets.
• Screw a 5×50 screw into the framework (then assembled with the supplied washer).
• Attach the suspension fittings inside the plinth in the milled groove using wood screws 3.5×17 mm (three screws per fitting).
• Hang the plinth onto the frameworks.
